Hi Glaze Enamel Paint – JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

Hi Glaze Enamel Paint

PRODUCT FEATURES
High gloss finish for walls, wooden and metal surfaces
Highly washable paint film
Tough film to take care of daily usage

Category:

Download Brochure | NEWS | National School of Interior Design

Direction for Use

FOR WOODEN SURFACE

FOR METAL SURFACE
• For newly plastered surface, ensure proper curing and check alkalinity before primer
application. Usually 28 days of curing is recommended for such surface.
• Remove dust, loose particles, algae & fungi and wash with water. Also check
presence of dampness and rectify as required.
• Apply Decoshield Waterproof Putty to fill up minor cracks or voids in the walls. For
major cracks, use mixture of white cement and sand in the ratio 1:3 and ensure curing.
• Apply suitable wall primer as a base coat for adhesion and better coverage and allow
proper drying.
• Mi l of JK GP Thinner (depending on surface) to 1 ltr of Hi-GLAZE Synthetic
Enamel and apply it on to the walls.
• Apply another coat of Hi-GLAZE Synthetic Enamel keeping a gap of 10-12 hours
(depending on surface condition).

FOR WOODEN SURFACE

• Sand properly and apply suitable wood primer as a base coat for adhesion and better
coverage and allow proper drying.
• Mi l of JK GP Thinner (depending on surface) to 1 ltr of Hi-GLAZE Synthetic
Enamel and apply it on to the wooden surface.
• Apply another coat of Hi-GLAZE Synthetic Enamel keeping a gap of 10-12 hours
(depending on surface condition).

FOR METAL SURFACE

• Sand properly to remove any rust present and apply suitable metal primer as a base
coat for adhesion and better coverage and allow proper drying.
• M f JK GP Thinner (depending on surface) to 1 ltr of Hi-GLAZE Synthetic
Enamel and apply it on to the metal surface.
• Apply another coat of Hi-GLAZE Synthetic Enamel keeping a gap of 10-12 hours
(depending on surface condition).

Flash point (IS101/1987 Part 1, Sec 6)

32° C

Gloss level

85-90° at 60° GH

Surface dry time

4-5 hours

Recoatability time

10-12 hours

Dilution Ratio

15-20% with JK GP Thinner

Stability of thinned paint

To be used within 24 hours

Coverage

100-110 sq.ft/ltr for 2 coat *

Available Pack Size

200 ml, 500 ml, 1ltr, 4ltr, and 20 ltr packs

Area of Application

Walls, Plaster, Wooden Doors, Wooden Furniture, Particle Boards, Windows, Grills, Shutters etc.

Reviews

There are no reviews yet.

Be the first to review “Hi Glaze Enamel Paint”

Your email address will not be published. Required fields are marked *

Need Help?
Scroll to Top