JK SYNTHETIC ENAMEL – JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

JK SYNTHETIC ENAMEL

JK SYNTHETIC ENAMEL TO IS:2932

PREPARATION

Remove grease, oil and other contaminants preferably by using Bison Degreasing Solvent. Blast clean to a minimum of Sa
21/2 Swedish standard SIS 05 5900 with a surface profile not exceeding 35-40 microns.
If blasting is not practical, make full use of mechanical tools along with manual chipping and wire brushing to remove
loose rust and scale to St. 2 Swedish Standard SIS 05 5900. Excessive burnishing of steel is to be avoided.
Thoroughly dust down all surfaces. The surface should be clean and dry before application of suitable primer coat.

APPLICATION

Mix the contents thoroughly before and during use.
Brush/Roller : Apply without thinning.
Conventional Spray : Add maximum upto 10-20% G.P Thinner, if required. Handgun with 66 Fluid Tip,
Airless Spray : Add upto 5% G.P Thinner if required. Use any standard equipment having pump ratio of 30 : 1, Tip
size 0.28 – 0.38 mm. Tip pressure 110 – 160 kg/cm2.

Category:

Download Brochure | NEWS | National School of Interior Design

 

USES

Recommended for use on Iron surface.
SCOPE

Synthetic Enamel is translated to give a glossy durable coating meeting IS:2932 specification. It is ideally suitable
for application on primed steel structures in air polluted atmosphere.
PRODUCT DATA

TYPE : Single Pack
COMPOSITION : Modified alkyd medium suitably pigmented
APPLICATION : By Brush / Conventional spray as per order.
DRY FLIM THICKNESS : 20-25 Microns
THEORETICAL SPREAD RATE : 14.4 – 18.0 Sq. Mtr/ ltr.
DRYING TIME
TOUCH : 3 – 4 Hrs.
HANDLE : 16 Hrs.
HARD OVERNIGHT : 20 Hrs.
OVERCOATING INTERVAL : Min – Overnight
FLASH POINT : Above 30OC

COLOUR : Assorted Shades
FINISH : Glossy
STORAGE LIFE : Upto twelve months.

CHEMICAL RESISTANCE
ACID : Satisfactory
ALKALI : Satisfactory
WATER : GOOD

FLEXIBILITY
Excellent
ABRASION RESISTANCE

Reviews

There are no reviews yet.

Be the first to review “JK SYNTHETIC ENAMEL”

Your email address will not be published. Required fields are marked *

Need Help?
Scroll to Top