JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax
PRODUCT FEATURES
Excellent protection against rust formation
Excellent adhesion with ferrous metal surfaces
Good anti-settling property
Good hiding and flow & levelling
Direction for Use
• Sand the ferrous metal surface very carefully to remove any rust particles or bittiness.
• Wipe with clean cloth.
• Apply JK RED OXIDE METAL PRIMER after thinning with JK GP Thinner as
recommended.
• Apply Hi-GLAZE Synthetic Enamel finish coat above this primer, keeping a gap of 6-8
hours (depending on surface condition).
| Flash point | 30° C |
|---|---|
| Surface dry time | 45-60 minute |
| Recoatability time | 6-8 hours |
| Dilution Ratio | 5-7% with JK GP Thinner |
| Stability of thinned paint | To be used within 24 hours |
| Recommended DFT | 20-25 microns per coat |
| Coverage | 110-120 sq.ft/ltr for 1 coat * |
| Available Pack Size | 200 ml, 500 ml, 1ltr, 4ltr, and 20 ltr packs |
| Area of Application | Ferrous Metal Surfaces like Grills, Gates Shutters etc. |
Reviews
There are no reviews yet.