JK EPOXY ZINC PHOSPHATE PRIMER – JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

JK EPOXY ZINC PHOSPHATE PRIMER

JK EPOXY ZINC PHOSPHATE PRIMER RED/GREY
Two component polyamide air drying epoxy composition with zinc pigments.

Features

  • General purpose anti corrosive primer protective coating system
  • Good resistance to water and mild chemicals.
  • Easy application by brush and spray.
  • Can be top coated with epoxy, chlorinated rubber, acrylic and polyurethane finish paints
  • Can also be applied on any iron surface for domestic purpose i.e. kitchen, toilet, balcony grills etc. For very high longevity
Category:

Download Brochure | NEWS | National School of Interior Design

 

PRODUCT GUIDE

TYPE: Two Pack, cured with polyamide

Composition : Catalyzed epoxy resin / zinc
Phosphate

Mixing ratio: Base: Catalyst – 3:1 by volume

Pot Life: 5-6 hours

Application: Brush, Airless or Conventional Spray

Recommended DFT: 25 35 microns per
coat

Corresponding WFT: 57 80 microns per coat

Theoretical Spreading Rate: 12.6 17.6 Sq.
Mtr./ Ltr/Coat

Drying Time:

TOUCH : 1 hour
HANDLE : 4 hour
HARD : Overnight

Curing Time: 6 7 Days

Over coating Interval:

MIN : Overnight
MAX : indefinite

Flash point: Above 22 c
Colour: Red Oxide& Grey
Finish: Mati
Packing: 1&4Lts.
Thinner/ Cleaner: Epoxy Thinner EP80
Storage Life: Up to 12 months as long as the sealed
containers are kept under cover in a dry place under
normal temperature conditions.

Reviews

There are no reviews yet.

Be the first to review “JK EPOXY ZINC PHOSPHATE PRIMER”

Your email address will not be published. Required fields are marked *

Need Help?
Scroll to Top