JK EPOXY FINISH PAINT – JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

JK EPOXY FINISH PAINT

JK EPOXY FINISH PAINT
Two component general purpose air drying epoxy coating.

Features

  • General purpose finish in epoxy systems for iron, steel expose to atmosphere.
  • Good resistance to water and mild chemicals.
  • Easy application by brush and spray. High Longivity.
Category:

Download Brochure | NEWS | National School of Interior Design

 

PRODUCT GUIDE

TYPE: Two Pack, cured with polyamide

Composition : Catalyzed epoxy resin suitably
pigmented

Mixing ratio: Base: Catalyst – 3:1 by volume

Pot Life: 4-6 hours

Application: Brush, Airless or Conventional Spray

Recommended DFT: 25 — 35 microns per
coat

Corresponding WFT: 61 85 microns per coat

Theoretical Spreading Rate: 11.7 16.4 Sq.
Mtr./ Ltr/Coat

Drying Time:

TOUCH : 2 3 hour
HANDLE : 6 8 hour
HARD : Overnight

Curing Time: 6 7 Days

Over coating Interval: Flexibility: Very Good
MIN : Overnight Abrasion Resistance: Good
MAX : 5 days

Flash point: Above 22 c
Colour: Assorted Shades
Finish: Glossy
Packing: 1,4 & 20Lts.
Thinner/ Cleaner: Epoxy Thinner EP80
Storage Life: Up to 12 months as long as the sealed
containers are kept under cover in a dry place under
normal temperature conditions.

APPLICATION

  • Stir the base thoroughly and then mix three parts of base and one part of catalyst by volume to uniform consistency. Allow
    the mixture to mature for 30 minutes and stir again before application and occasionally during use.
  • Brush: Apply without thinning. However if required during application add max 5% thinner EP80
  • Conventional Spray: Add up to 10% Epoxy Thinner EP80 depending on conditions. Use any standard equipment
    atomizing pressure of 3.5 — 4.2kg/cm2
  • Airless Spray: Apply preferably without thinning. However, up to 5% Thinner EP80 may be added if absolutely essential
    depending on conditions. Use any standard equipment having pump ratio 30:1. Tip size 0.38 — 0.43 mm. Tip pressure 110
    — 140 kg/cm2

Reviews

There are no reviews yet.

Be the first to review “JK EPOXY FINISH PAINT”

Your email address will not be published. Required fields are marked *

Need Help?
Scroll to Top