Blokfix Putty – JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

JK Protomax: Gypsum Plaster & Waterproof Wall Putty in Kolkata | JK Protomax

Blokfix Putty

PRODUCT FEATURES
White cement based polymer putty
Smooth finish and good whiteness
Can be applied on Interior AAC Block surfaces without any
plaster applied in it
For exterior walls it is recommended to use JK Readymix Morter as a
base coat before putty application.
Good resistance to algae, fungi and minor cracks
Good adhesion to emulsion paints

directly

Does not require any curing

Category:

Download Brochure | NEWS | National School of Interior Design

 

Direction for Use

• For newly , check alkalinity before
painting. Usually 28 days of curing is recommended for masonry surface.
• Remove dust, loose particles, algae & fungi by wire brushing and wash with water.
Also check presence of dampness and rectify as required.
• For major cracks, use mixture of white cement and sand in the ratio 1:3 and ensure
curing.
• Apply BLOKFIX PUTTY with putty applicator or trowel as per recommended mixing
ratio.

• Allow proper drying time before sanding this putty.
• Clean the surface thoroughly and apply suitable primer and emulsion paint.

Interior and Exterior AAC Block/Masonry surfaces

• Please ensure proper alignment of AAC Block bedding and even AAC-block surface
before application of putty, so as to maintain smoothness in the surface.

Surface dry time

Max. 1 Hour

Recoatability time

5-6 hours

Dilution Ratio

30-35% with water

Stability of thinned paint

To be used within 30 minutes

Coverage

10 sq.ft/Kg for 2 coat *

Available Pack Size

40 Kg pack

Area of Application

Interior and Exterior AAC Block/ Masonry surfaces

Reviews

There are no reviews yet.

Be the first to review “Blokfix Putty”

Your email address will not be published. Required fields are marked *

Need Help?
Scroll to Top